Archive

Category Archives for "Buying Advice"

Coffee Maker Troubleshooting

Coffee-Maker-Troubleshooting

Your coffee maker can suddenly stop working due to some different reasons. But for the most part, it is because of the mineral build up which cause your machine to have problems. These can change your coffee’s taste and gradually damage your machine. SO getting to know the problem before it gets out of hand will save you money to invest in a brand new machine. And here are some tips and hints to help you recognize as well as deal with your coffee maker’s problems.

1.     What are the symptoms?

If you find the water not properly flowing into your pot, then there could be some issues which are common to a coffee maker. But please feel safe that no matter what the problem is, it can be easily fixed.

2.     What to check?

There are some different things that need to be checked when your water is not appropriately flowing in your coffee maker. And the most common issue maybe that the tube in the coffee pot is clogged, causing liquid not to easily flow through.

It could be due to the issue that your timer or even the thermostat be broken or bad. And in case none of these possibilities seem to be the matter, you should check the pump valve. The issue that water is not flowing through could be the symptom of the problems with your pump valve: it maybe get stuck or broken. And the last thing to check when you coffee pot doesn’t allow water circulation is to check the heater in your coffee pot since it could be broken.

3.     What to note?

Once you try to understand the matters and solve on your own, you should pay attention to some precautions.

First of all, when it comes to opening up your machine and poking around, make sure that it is totally unplugged.

  • In case your coffee is not warm after having been brewed, it’s time you took a look at the element and the switch of warm keeping. Check whether or not the auto shut off switch is correct position.
  • In case your machine seems to be leaking or steaming way more than it should, it’s time you considered the tubing in your coffee maker. You can easily solve it by properly installing it into your coffee pot.
  • In case the coffee is not in strong taste as it used to and seems to get weaker and weaker, it is possible that there is a problem with the plate which make all of the water spread out right above your basket. In this case, check whether it is clogged, cracked or even broken completely.

4.     How to prevent?

Ok, knowing how to deal with issues is good, but it is much better if you know way to prevent the issues from happening. So one of the most simple and effective ways to keep your coffee maker working well is to clean it regularly. And a very easy way to keep it clean is to flush it out with vinegar. This claims to clean your item out thoroughly and eliminate any clogs.

Basic Things About A Coffee Maker

Basic-Things-About-A-Coffee-Maker

You are a coffee lover and in plan to invest a coffee maker at home? SO how much do have you known about this awesome appliance? Yeah, my honest article today will provide you with the basic information that any coffee maker owner should know. Let’s follow to gain the best understanding about your machine and be able to operate it well.

Coffee maker: How does it work?

Coffee maker makes use of a simple process to brew nice morning cup of joe. It uses stored water reserves to remove flavor from ground coffee beans. As long as the workout finishes, there will be a delicious brew that’s ready to serve you. Most drip coffee makers apply the same method to make this infusion. And we can divide the process into some different steps.

How does it start?

Most of coffee makers available in the market now keep water in a container before letting you start your brewing process. You can use the carafe to determine the amount of water that you want to use, then add it into the tank on the top of the device. These tanks are available in several different sizes. They keep enough water to make you a full pot of coffee while you are not required to completely fill the container for the process to work. The machine will store water in the container until you turn on the machine and start brewing.

How does it heat

If you take a look into at the container before adding water, you will easily find a small hole in the base. In fact, water drains via this hole and into a tube. From here, it accesses the bottom of the coffee maker. The water is kept into its tube while it runs through heating element. The water reaches its boiling temperature there, and air bubbles force it up the tube to the top of the device.

The Drip

As long as the heated water reaches the top of the coffee maker, it drips out into ground coffee beans. It drips continuously, which helps to soak the beans and finally run through the filter before getting through the carafe below. During the dripping process, the coffee maker makes uses of the heated water to take out the entire flavor that the roasted beans have to offer.

Ok, here are not all, but they are basic things that any coffee maker owners need to know. So let’s learn to understand your machine well and be able to make it work at its best for you. Ok, so what more are you waiting for? Order your desired coffee maker right now and enjoy nice cup of coffee whenever you want.

4

What Are Common Problems Of Keurig Coffee Maker And How To Deal With Them?

Overview

keurig-problemsThe Keurig coffee maker is getting more and more popular in the world of coffee maker for its ease of use, convenience as well as the huge variety of K-cups which offer tasty coffee, hot chocolate or tea. However, everything has two sides, in spite of so many praises like this, there are some keurig coffee maker problems remaining. And my honest article today will address some of the most common keurig problems and ways to deal with them as well. You will finally have your best keurig work fine.

What are common keurig problems and how to deal with them?

Grounds in your cup

This is common issue that many of us have experienced. It often happens when the needle which stabs the K-cup gets clogged with the grounds and the trapped grounds move to your cup on the next brewing, resulting in a horrible grainy texture in your coffee. But don’t be worried too much, this issue can be easily repaired, just by washing the needle with a fine pointy item like a toothpick. And it often mentioned as keurig 2.0 problems. After this needle cleaning, you can enjoy tasty Keurig K-cup coffee, with no grainy grounds remained in your cup!

Plastic tasting coffee

This keurig problems often happens with new Keurig Single Serve coffee machines. When it happens, you will find the coffee brew has a different plastic taste which is unpleasant. It is caused when the residue of the new brewing parts is transmitted to the water throughout the brewing procedure. It can be resolved just by rinsing the brewing line, using white vinegar. So how to conduct the rinsing process? Yeah, here is the specific step:

  • Add a cup of white vinegar in the water container.
  • Have the brew cycle run repeatedly until the container is completely empty, this process will help to clean the brewing line as well as remove plastic taste.
  • It’s now time to rinse the line with water, to stop possible vinegar taste: Pour filtered water in the container and operate the brew cycle until the container is empty.

Ok, now continue your process and making your tasty coffee, there will be no plastic taste remained!

Water line is clogged

Water lines in Keurig brewers are often small, so it can be clogged with grounds and other debris easily. This is a very common keurig problem that you can identify when you find a lesser quantity of coffee in your cup than the amount you have selected before. In case the clog is too bad, you even get no coffee after a brewing cycle! To repair this, blush the water line by operating the brewing cycle with water only, no K-cup. In addition, clean the needle to take out grounds which might be stuck inside. Finally, you will find your water line open and get ready to give you a full cup of great-tasting coffee.

In case the water line has been cleaned up yet, then try descaling the device. And this process will promise to deliver tasty coffee at the push of a button, even it is keurig 2.0 problems,  Keurig k45 or any other ones.

Machine shuts off between brew cycles

Ok, if your Keurig single serve brewer suddenly shuts off during brew cycles, even you have not switched it off, don’t feel worried. Many users have experienced it, too.

This issue is cause due to the fact that the vibrations have dislodged the magnet in the water reservoir. So to deal with it, simply take out the reservoir, then assemble it again, make sure that the magnet is set in correct position. And now, let’s resume your brewing.

The Keurig Brewer is leaking water

If you find some leakages in your Keurig brewer, you are likely to have a keurig problems that the upper rubber gasket is missing, faulty, or inappropriately installed. This part is placed around the upper puncture needle, so to deal with the issue, check whether it is in the place. If not, purchase another one, or contact Keurig if your guarantee is still valid. In case it is still available and the leakage is happening, the issue is due to incorrect adjustment since it is not forming a seal with the K-cup and incoming water, which causes the water and grounds to leak out and make a mess. To repair this, just move the gasket down about ¼ inch to close up the gap between the needle and the K-cup.

Mineral Build-up

Some users assume this issue is a design problem, but it is more of a usual maintenance issue. Every coffee machine needs to be descaled at some point, and the Keurig model is not an exception.

After certain time of using, mineral from the water passing through the brew line will form and make effects on the competence of your brewer. This may also influence your coffee taste since the mineral build-up is likely to cause an unpleasant flavor in your cup. And to descale your machine, buy a “Brew Rite Cleaner” which is particularly designed to remove mineral deposits. Ok, to have this device worked, let’s add water in the Brew Rite Cleaner and make a brew cycle to blush the water line. You can also use white vinegar instead of water, but then remember to use water to eliminate the vinegar. And no matter what way you apply, conduct it every 6 month to have your machine operated optimally.

Final Words

Ok, so have you ever experienced any of the Keurig problems above? Did you deal with it in correct way? And does your machine work fine after your resolving? The information in this article will claim to help you deal with the issue in the best way. Are you ready to try? Give us your own reviews after the process.

How To Clean And Maintain A Keurig Coffee Maker?

Overview

How-to-clean-a-Keurig

To Clean Keurig is simple but plays an important role in protecting and keeping your keurig coffee maker long lasting and in good condition. There are several ways to conduct this process. The first one is general cleaning which makes uses of soap and dish for cleaning. For the best result, you need to do this process regularly. The other way is to make use of vinegar. And you should perform it two to four times every year, depending on your frequency of using the machine. It is said to be ideal if you want to keep your coffee delicious.

Ok, so what exactly these two methods are? How to apply them with your best keurig? Let’s consider the following information for details.

How to Clean keurig?

Method 1: General Cleaning

Ok, this method should be done as the procedure below:

Take out the brewer. Remove the brewer’s cover by lifting the handle and taking out the internal K-Cup holder.

In order to remove the K-Cup holder, grasp the top of the holder with one hand. Then push up on the bottom of the K-cup gathering from below, using the other hand. The gathering should be done gradually.

Please be careful when detaching the K-Cup holder because there are two sharp needles inside which may hurt you when you remove the gathering haphazardly.

The remaining pieces should be removed relative ease. Lightly pull on the funnel as soon as it detaches from the K-Cup holder. Then detach the drip tray, just by pulling it away from the base of the item.

In the next step, clean the K-cup containers, funnel, drip plate as well as drip tray. You can use your dishwasher since these parts are all safe with dishwasher. After cleaning them, put them at the rack of the dishwasher and have the machine worked on the standard wash setting.

You can also clean your K-cup with your hand. To do this, just clean it under warm to hot water. In this case, you don’t need to add scrubbing or detergent, however, do it with carefully or you will get stabbed by the sharp needles insider the container.

And if you want, you can also clean the funnel, drip plate and drip tray by your hand. Just submerge these elements with hot soapy water, and gently scrub it with soft cloth. Try to rinse carefully to take out all soap residues.

After cleaning all necessary parts, it’s time to dry them all. You can choose to put them under air hours for drying or dry it by yourself with clean dish towel.

Clean the current needle. Ok, exit three-hole- needles are available in both inside the bottom and upper portions of K-Cup container. Eliminate every debris out of these holes by placing a paper clip into each one and dealing with the inside space.

Clean the water holder and detachable lid. Note that these parts are unsafe when getting washed with dishwasher, so you need to wash it on your own hand, using clean and soft cloth. Don’t use cleansers or detergents with these parts since chemicals near water container can make your water resource polluted in near future.

Wipe the external parts of the item out. Use clean and soft cloth to eliminate every water stains and dried coffee grounds on the brewer.

If you want, you can use a soap cloth for more throughout cleaning. But please remember to rinse the soap residue out of the item before cleaning it with damp and soft cloth.

Ok, after Cleaning keurig like this, it’s time to reassemble the item. First, snap the funnel back onto the K-Cup and place the K-cup back into the device. Following signals on the parts for correct assembling.

Method 2: Vinegar Soak

This way to Clean keurig involve some steps as follow:

Have a vinegar rinse to run throughout the device. Add undiluted vinegar in the water holder. Shake the vinegar through the device. This process can be known as descaling and should be performed each three or 6 months. It allows removing excess grime sticking insider the brewer. If you make no effect, this grime is likely to damage the machine’s capacity to heat up and work properly.

After this process, put a ceramic mug on the drip try to treat the vinegar which brews though the machine. One thing to remember in this step is not to use any K-cup while performing the vinegar rinse.

If you are using mini models, add 10 oz (or 300 ml) of undiluted white vinegar water in the water holder. Wait about 5 minutes, then lower the brewer handles, and push the brew button. The button will turn red and start brewing the vinegar through the machine.

In case you are using a standard-size model, add 48 oz (or 1500 ml) into the water holder, then press brew button. Let the contents be brewed into the mug below.

Remove the warm and dispensed vinegar by dumping it down the sink.

Conduct the second vinegar rinse. Yeah, just repeat the first vinegar rinse, but let the vinegar available for certain period of time so that the device will be descaled completely.

Put the same ceramic mug which was used during the first vinegar rinse on the drip tray. And don’t use a K-cup during the process.

If you are using a min models, add 10 oz (300 ml) of white vinegar into the water container then lower the brewer handle for 5 seconds. Press “brew” button, and power the device down as long as it begins dispensing the vinegar. Let the remaining vinegar in the brewer about 30 minutes then press brew button to complete the brewing cycle. Pour the hot and dispensed vinegar water to remove it.

In case you are using a standard-size model, pour 48 oz (1500 ml) of vinegar in the water container then press brew button as usual. Once it is informed that the water is added, pause the procedure and let the vinegar in the brewer for 4 hours and keep the device on. Finally, dump the remaining vinegar.

Continue the process to Clean keurig with fresh water rinse. Use clean water during brewing cycle to take out every vinegar residue.

Put a ceramic mug in the drip tray to catch every dispensed water.

Don’t add any K-cup to the device.

Pour the waiter container with fresh, cold water. If you are using a mini model, add 10 oz (300ml) of water. If you are using a standard-size model, add 48 oz (1500 ml) of water.

Press the brew button and continue brew cycle as usual. Remove hot brewed water by pouring it down the sink.

Repeat the process with cold water three or more times to remove every remaining vinegar taste.

Ok, these two methods are applicable for a range of keurig machine, including noth Keurig 2.0 and Keurig k45

Some tips for better cleaning keurig coffee maker

Make use of distilled water to Clean keurig whenever it is possible. Tap water includes minerals which form over time. If you keep using hard tap water, you will have to clean and maintain your keurig coffee maker more regular.

Have the machine work by running a cleansing brew of water through your brewer after making a sticky drink. This will further clean your device, avoid an additional amount of sticky sugar crystals.

https://www.youtube.com/watch?v=SfrcJI6TVWs

Final Words

OK, here are two popular and effective ways to clean a keurig coffee maker, which have been proven by the producers and thought the real user’s review. Are you clear about them? And which one is more suitable for you? Let’s consider and follow one of them, you will have clean machine which serves you for a long time.

How To Use Keurig Coffee Maker Properly?

Introduction to keurig coffee maker

how-to-use-a-keurigKeurig coffee maker is an amazing beverage brewing system supposed to serve for both home and commercial use. It is developed by a reputed American company named Keurig Green Mountain which deals with various products of the field, of which the main products are K-Cup pods (a single-serve coffee container), beverage pods as well as the proprietary devices which help to make the beverages with these pods. Since its first launching, it has been recognized as Best keurig coffee maker in the field.

This potential system allows you to produce various products, including hot and cold coffees, cider, dairy-based beverages, teas, cocoas, lemonades, and fruit-based drinks.

In term of design, the system include a used K-Cup pod, with the top foil and the removable used coffee grounds, and revealing the filter

Keurig models are so various, and up to now, it includes:

In addition, Keurig introduces some commercial brewing items, specifically for offices using, and some other organization, such as hotel, hospital, college…and up to now, these models are:

  • K10 – dorm-room maker
  • K130 – in-room maker for hotels
  • K145 OfficePRO – small-business maker
  • K155 OfficePRO Premier Brewing System – small-business making system with some additional features
  • K140 – small office maker
  • K150 – larger office maker
  • K3000SE – high-capacity maker
  • Bolt Z6000 – full-pot office maker that allows you to make a 64-ounce pot quickly

How to use Keurig properly?

In spite of various brands and models like this, the use of these Best keurig coffee makers is so simple and almost similar.

First of all, to before have it worked, you need to prepare several things, including:

  • Coffee mug
  • Water
  • Keurig K-Cup (or well-matched individual plastic cup which is available with coffee grounds)
  • Refillable K-Cup (not obligatory)Coffee in a Flash

And here is the step to run the item:

  • Connect the device with the power resource. Although Keurig is able to work fast, it needs some moments to heat the water.
  • Pour proper amount of water into the reservoir. Keurig machine is able to hold enough water for some cups of coffee at once. Some item even have containers which lift away from the machine; however, there are some others which require you to fill water into a fixed reservoir. The reservoir lid is on the top left of the device. Then you should lift it up then fill it with water. There may be a buzzing noise during the workout, which is the time when the machine takes in water to heat.
  • Select your coffee. A lot of machines introduce a collection of K-Cups, which are single plastic cups offering you not only coffee but also a filter. So let’s select the one you like, but do not take out the foil lid.
  • Add the K-Cup. There is a handle right above the Keurig logo, at the center of the device, so let’s lift it softly to unlock the coffee chamber and set the circle-shaped hole. Put the cup into the hole and close the lid, using the handle. It’s time to pay attention to the machine’s display. Please wait until it shows the line “Ready to Brew.”
  • Prepare your mug, making sure that it is ready for the workout. Put the mug on the tray at both the bottom and the machine’s center. Make sure that your mug is well-matched with the item that you’re using. In general, you may want a mug that is able to store 10 ounces or more and match with the tray.
  • Select your desire mug size. There is some machine which offers this option, if so, choose the Brew button. Many of other Keurigs are designed to fill cups of changeable sizes. There will be some bottoms marked with the picture of a cup of tea under the display. If you have never experienced a Keurig before, it is recommended to choose the smallest in order that the cup does not overflow.
  • Yeah, after such steps, it’s time to press starting buttom and wait some minutes to enjoy nice coffee.

https://www.youtube.com/watch?v=u55BTgYFBpY

Tips & Warnings

Beside following the suggested steps above, you need to pay attention to some tips and warnings in order to have the machine always worked fine.

Yeah, there is a common complaint about these Best keurig coffee maker is that they are extravagant. The K-Cups are made of plastic, and many users throw them away after using. So now they offer a filter with two key benefits: It is refillable and reusable, and it is compatible with every kind of ground coffee. You want to experience it rather than the disposable cups, right?

Bottom Line

Ok, above is the most basic information when it comes to How to use keurig coffee maker properly. Are you clear about them all? And are they reliable enough? Yeah, they are all proven knowledge suggested by the producer and reviews of real users. So I think there is no reason to suspect them. What I want to recommend you now is to consider and follow them carefully so that you will have it work fine.